Find Your Powder
Our Hardfacing Product Finder tool quickly identifies the ideal solution based on industry, application, and performance requirements.
Filter Results
Found materials matching your search input.
Showing 73–84 of 191 results
-
Colmonoy® 5200-601
Composite Powder Containing 40% of a Ni-B-Si Matrix and 60% Cast Tungsten CarbideDESCRIPTIONDeposits offer extreme wear resistance.APPLICATION METHODS- Laser Cladding
- PTA
TYPESNickelGlobal50 -
Colmonoy® 5200-6010
Composite Powder Containing a Ni-B-Si Matrix with 60% Angular Cast Tungsten CarbideDESCRIPTIONOffers extreme wear resistance and good resistance to high temperature corrosion and erosion. Since the composite deposit contains a large amount of tungsten carbide, its macrohardness is often higher than that of the matrix, depending on welding conditions.APPLICATION METHODS- Laser Cladding
- PTA
TYPESCarbideGlobal50-60 -
Colmonoy® 52C
Nickel-Based Hard-Surfacing Alloys with Increased Ductility, Better Impact Resistance, and Moderate HardnessDESCRIPTIONFor use on new parts to resist against wear, corrosion, heat, and galling. Also used for repair of work or out of tolerance parts.APPLICATION METHODS- Fusewelder™ Torch
- Thermal Spray / Spraywelder™
TYPESNickelWCL45-53 -
Colmonoy® 52M
Nickel-Based Hard-Surfacing Alloys with Increased Ductility, Better Impact Resistance, and Moderate HardnessDESCRIPTIONFor use on new parts to resist against wear, corrosion, heat, and galling. Also used for repair of work or out of tolerance parts.APPLICATION METHODS- Fusewelder™ Torch
- Thermal Spray / Spraywelder™
TYPESNickelWCL45-53 -
Colmonoy® 52SA
Nickel-Based Hard-Surfacing Alloys with Increased Ductility, Better Impact Resistance, and Moderate HardnessDESCRIPTIONFor use on new parts to resist against wear, corrosion, heat, and galling. Also used for repair of work or out of tolerance parts.APPLICATION METHODS- Fusewelder™ Torch
- Thermal Spray / Spraywelder™
TYPESNickelWCL45-53 -
Colmonoy® 53
Nickel-Based Hard-Surfacing Alloys with Good Crack Resistance, Good Impact Resistance, and Moderate HardnessDESCRIPTIONProduced by intert gas atomization and can be spray deposited and fused to achieve a dense metallurgically bonded coating layer.APPLICATION METHODS- Fusewelder™ Torch
- Thermal Spray / Spraywelder™
TYPESNickelWCC45-53 -
Colmonoy® 53 HV
Nickel-Based Hard-Surfacing Alloys with Good Crack Resistance, Good Impact Resistance, and Moderate HardnessDESCRIPTIONProduced by intert gas atomization and can be spray deposited and fused to achieve a dense metallurgically bonded coating layer.APPLICATION METHODSHVOF/HVAFTYPESNickelWCC45-53 -
Colmonoy® 53F
Nickel-Based Hard-Surfacing Alloys with Increased Ductility, Better Impact Resistance, and Moderate HardnessDESCRIPTIONFor use on new parts to resist against wear, corrosion, heat, and galling. Also used for repair of work or out of tolerance parts.APPLICATION METHODS- Fusewelder™ Torch
- Thermal Spray / Spraywelder™
TYPESNickelWCL45-53 -
Colmonoy® 55W-H
Nickel-Based Hard-Surfacing Alloys for Dense Coatings That Resist Abrasive, Erosive and Metal to Metal WearDESCRIPTIONContains tungesten carbide particles and is dense that resist abrasive, erosive, and metal to metal wear.APPLICATION METHODSHVOF/HVAFTYPESNickel -
Colmonoy® 56 L
Nickel-Based Hard-Surfacing Alloys to Resist Abrasion, Corrosion, Heat and GallingDESCRIPTIONHigh levels of chromium carbides for superior abrasion and corrosion resistance.APPLICATION METHODS- Hardfacing Rod
- Hardfacing Wire
- Laser Cladding
TYPESNickel -
Colmonoy® 56 PTA
Nickel-Based Hard-Surfacing Alloys to Resist Abrasion, Corrosion, Heat and GallingDESCRIPTIONHigh levels of chromium carbides for superior abrasion and corrosion resistance.APPLICATION METHODS- Hardfacing Rod
- Hardfacing Wire
- PTA
TYPESNickel -
Colmonoy® 56 SPL PTA
Nickel-Based Hard-Surfacing Alloys to Resist Abrasion, Corrosion, Heat and GallingDESCRIPTIONHigh levels of chromium carbides for superior abrasion and corrosion resistance.APPLICATION METHODS- Hardfacing Rod
- Hardfacing Wire
- PTA
TYPESNickel